Amir Hossein Mahmoudi

Associate Professor

Update: 2024-12-21

Amir Hossein Mahmoudi

Faculty of Engineering / Department of Mechanical Engineering

Journal Paper

  1. "An approach to predicting corrosion fatigue for marine applications"
    Rahman Seifi, Amir Hossein Mahmoudi, آوا خواجه ئیان
    INTERNATIONAL JOURNAL OF FATIGUE, 2023
  2. "Application of spherical macro-indentation for determination of plastic anisotropy and residual stresses using indentation geometry and inverse analysis"
    Amir Hossein Mahmoudi, ارش کرباسیان
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023
  3. "An improvement in data interpretation to estimate residual stresses and mechanical properties using instrumented indentation: A comparison between machine learning and Kriging model"
    Amir Hossein Mahmoudi, صبا سلمانی قنبری
    ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, 2022
  4. "Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: A Numerical and Experimental Approach"
    alireza Shooshtari, Amir Hossein Mahmoudi, Farzad Tatar
    Iranian Journal of Materials Forming, 2021
  5. "Effects of water jet peening on residual stresses, roughness, and fatigue"
    Amir Hossein Mahmoudi, امیرمحمد جمالی, آوا خواجه ئیان, Fahimeh Salahi
    SURFACE ENGINEERING, 2020
  6. "Measuring Nonequibiaxial Residual Stresses and Mechanical Properties Using Knoop Indentation"
    Amir Hossein Mahmoudi, Amirreza Hosseinzadeh
    JOURNAL OF TESTING AND EVALUATION, 2020
  7. "Residual Stresses Measurement in Hollow Samples Using Contour Method"
    Amir Hossein Mahmoudi, Daryush Yoosefzadeh, Foroogh Hosseinzadeh
    International Journal of Engineering; Transactions B: Applications, 2020
  8. "Application of a portable indentation rig with Rockwell indenter to determine mechanical properties and residual stresses on an aluminum plate"
    Amir Hossein Mahmoudi, صبا سلمانی قنبری
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2020
  9. "Shot peening effects on corrosion behavior of commercial pure titanium in body simulating solution"
    Arash Fattah-alhosseini, Amir Hossein Mahmoudi, مرضیه نبئی
    Materials Research Express, 2019
  10. "Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, k MINAII, Mohammad Chamani
    International Journal of Engineering, 2019
  11. "The effect of plugging of tubes on failure of shell and tube heat exchanger"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Mohammad Chamani, A Kioumarsioskouei
    ENGINEERING FAILURE ANALYSIS, 2019
  12. "An approach for Knoop and Vickers indentations to measure equi-biaxial residual stresses and material properties: A comprehensive comparison"
    Amir Hossein Mahmoudi, Amirreza Hosseinzadeh
    MECHANICS OF MATERIALS, 2019
  13. "Shot peening effects on residual stresses redistribution of offshore wind monopile multi-pass weldments"
    Amir Hossein Mahmoudi, Ali Mehmanparast, اوا خواجه ئیان
    MARINE STRUCTURES, 2019
  14. "Effect of initial surface treatment on shot peening residual stress field: Analytical approach with experimental verification"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Khalil Sherafatnia
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018
  15. "Failure analysis of bolt connections in fired heater of a petrochemical unit"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Mohammad Chamani, Kazem Reza Kashizadeh, A Mostafazadeh, Hossein Afshin
    ENGINEERING FAILURE ANALYSIS, 2018
  16. "A modification to the cross slitting method for measuring two components of residual stresses"
    Amir Hossein Mahmoudi, Alireza Hasani
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2017
  17. "Determination of mechanical properties using sharp macro-indentation method and genetic algorithm"
    Amir Hossein Mahmoudi, Amirreza Hosseinzadeh
    MECHANICS OF MATERIALS, 2017
  18. "Ductile to brittle failure transition of HSLA-100 Steel at high strain rates and subzero temperatures"
    Gholam Hossein Majzoobi, Amir Hossein Mahmoudi, S. Moradi
    ENGINEERING FRACTURE MECHANICS, 2016
  19. "A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Ali Ghasemi, Khalil Sherafatnia
    Materials and Design, 2016
  20. "Spherical Indentation, Part II: Experimental Validation for Measuring Equibiaxial Residual Stresses"
    Amir Hossein Mahmoudi, Mirta Ghanbari-Matloob, Abbas Gomar
    JOURNAL OF TESTING AND EVALUATION, 2016
  21. "Shot peening coverage effect on residual stress profile by FE random impact analysis"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Ali Ghasemi, S. M. Hassani-Gangaraj, Mario Guagliano
    SURFACE ENGINEERING, 2016
  22. "Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior"
    Amir Hossein Mahmoudi, Gholamhossein Farrahi, Ali Ghasemi, Khalil Sherafatnia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016
  23. "Influence of asymmetrical cuts in measuring residual stresses using contour method"
    Amir Hossein Mahmoudi, Ashkan Saei
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2015
  24. "Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses"
    Amir Hossein Mahmoudi, Soroush Heydarian, Kourosh Behnam
    International Journal of Engineering, 2015
  25. "A Novel Method to Determine Material Properties and Residual Stresses Simultaneously using Spherical Indentation"
    Amir Hossein Mahmoudi, Sayyed Hassan Nourbakhsh Shourabi, Mirta Ghanbari-Matloob
    JOURNAL OF TESTING AND EVALUATION, 2015
  26. "A Novel Cutting Strategy for Measuring Two Components of Residual Stresses Using Slitting Method"
    Amir Hossein Mahmoudi, Soroush Heydarian, M.R. Sheikhpour
    EXPERIMENTAL MECHANICS, 2014
  27. "Analysis of resistance of concrete target against penetration of eroding long rod projectile regarding flow field around the projectile tip"
    Ali Alavi Nia, Amir Hossein Mahmoudi, Mahmoud Nili, مجتبی ذوالفقاری, Hossein Khodarahmi
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2013
  28. "بررسی تجربی و عددی تاثیر فرایند ساچمه زنی شدید بر افزایش عمر خستپی آلومینیوم A356"
    Rahman Seifi, Amir Hossein Mahmoudi, Gholamhossein Farrahi, مجید نیکنام, علی قاسمی
    مهندسی مکانیک شریف, 2017

Conference Paper

  1. "بررسی عملیات کوبش فراصوتی بر تنش باقی مانده در جوشکاری قوس الکتریکی فولاد کربنی API-5L-X65"
    Amir Hossein Mahmoudi, Abbas PAK, F Sh, K R
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
  2. "بررسی عددی اثر نحوه حرکت لیزر در ساخت افزایشی ذوب لیزری انتخابی بر تنش پسماند قطعه"
    Amir Hossein Mahmoudi, Maryam Arami, Fatemeh Karamifard
    ISME, 2019
  3. "طراحی و ساخت دستگاه پرتابل اندازه گیری تنش پسماند به روش نفوذ"
    Amir Hossein Mahmoudi, صبا سلمانی قنبری
    26 th annual international conference of iranian society of mechanical engineers ISME2018, 2018
  4. "بررسی عددی اثر تنشهای پسماند حاصل از عملیات حرارتی کوئنچ بر عمر خستگی نمونه تخت"
    Amir Hossein Mahmoudi, آوا خواجه ئیان
    26 th annual international conference of iranian society of mechanical engineers ISME2018, 2018
  5. "بررسی خواص مکانیکی و ریزساختار پوشش های نانو ساختار تک لایهTiN و چندلایه Ti-TiN به روش پوشش دهی تبخیر قوس کاتدی"
    Amir Hossein Mahmoudi, mohsen sheikhi, Hassan Elmkhah, منیژه نجفی
    18th National conference of surface engineering, 2018
  6. "A Novel Method to Obtain Material Properties through Knoop Indentation"
    Amir Hossein Mahmoudi, امیررضا حسین زاده یحیائی
    X-Mech 2018, 2018
  7. "بررسی اصول طراحی دیگ آبگرم سه پاس و تحلیل تنش با شبیه سازی المان محدود"
    Amir Hossein Mahmoudi, رویا رسولی همت, صبا سلمانی قنبری
    ISME2017, 2017
  8. "A Neural Networks Approach to Measure Residual Stresses using Spherical Indentation"
    Amir Hossein Mahmoudi, میترا قنبری مطلوب, Soroush Heydarian
    International Conference on Residual Stresses 9, 2014
  9. "Numerical and Experimental Study of the Plasticity Effect on Residual Stress Measurement using Slitting Method"
    Amir Hossein Mahmoudi, Soroush Heydarian, Kourosh Behnam
    International Conference on Residual Stresses 9, 2014
  10. "تغییر الگوی برش در اندازه گیری تنش پسماند به روش کانتور"
    Amir Hossein Mahmoudi, اشکان ساعی
    ISME2014, 2014
  11. "مطالعه ی توزیع مجدد تنش پسماند در جوشکاری ترمیمی به روش اجزای محدود"
    Amir Hossein Mahmoudi, Masoumeh Taghizadeh
    ISME2014, 2014
  12. "تحلیل اجزاء محدود سه بعدی میدان تنش پسماند ناشی از جوشکاری در اتصال لولهای صلیبی شکل"
    Gholam Hossein Majzoobi, Amir Hossein Mahmoudi, Nabard Habibi, Maliheh Heiran, Gholamhossein Farrahi
    ISME2014, 2014
  13. "An Asymmetrical Application of Contour Method in Measuring Residual Stresses"
    Amir Hossein Mahmoudi, اشکان ساعی
    International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), 2014
  14. "Residual Stress Measurement in Quenched Samples using Ring-Core Technique"
    Amir Hossein Mahmoudi, سجاد ربیعی
    International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), 2014