menu
Faramarz Fereshteh-Saniee

Professor

Update: 2024-12-21

Faramarz Fereshteh-Saniee

Faculty of Engineering / Department of Mechanical Engineering

Journal Paper

  1. "Superior combined strength and elongation by conducting elevated temperature constrained groove pressing on Al–Mg–Mn sheets"
    Faramarz Fereshteh-Saniee, علی احمدی جبلی
    MATERIALS CHEMISTRY AND PHYSICS, 2023
  2. "Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets Using CRITIC, MEREC and TOPSIS Techniques"
    Faramarz Fereshteh-Saniee, سعید یعقوبی, مسعود صفری
    Iranian Journal of Materials Forming, 2023
  3. "Inclusive anisotropy and texture analyses of AZ91 Mg sheets subjected to various passes of elevated-temperature constrained groove pressing"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی, Ali Sonboli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023
  4. "Textural and microstructural analyses and ranking of the process parameters in hydro-mechanical deep drawing of AZ31B magnesium sheets"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    Journal of Materials Research and Technology-JMR&T, 2023
  5. "EFFECTS OF PROCESS VARIABLES ON THE UNIFORMITY OF AL-ST AND AL-MG LAMINATED COMPOSITE CUPS PRODUCED BY HYDRO-MECHANICAL DEEP DRAWING OPERATION"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023
  6. "Microstructure and hot shear deformation behavior of a fine-grained AA5083 aluminum alloy"
    Faramarz Fereshteh-Saniee, احسان خادمی, نعیمه فخار, ّamir momeni, Mahdi Sabbaghian, Peter Nagy, Abel Szabo, Jeno Gobicza
    MATERIALS CHEMISTRY AND PHYSICS, 2023
  7. "A comprehensive comparison between the effect of elevated temperature constrained groove pressing on the microstructural evolutions, crystallographic texture, and mechanical properties of Al 2024 and Mg AZ91D alloys"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی, سعید یعقوبی
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022
  8. "A comprehensive study on soundness, microstructure, and uniformity of 2024 aluminum cups hydro‑mechanically drawn at elevated temperatures"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022
  9. "EFFECTS OF MOLD ROTATION SPEED AND CAST THICKNESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ80 PREPARED BY CENTRIFUGAL CASTING"
    Faramarz Fereshteh-Saniee, مهدی عربی نور
    International Journal of Metalcasting, 2022
  10. "Optimization of the geometrical parameters for elevated temperature hydro-mechanical deep drawing process of 2024 aluminum alloy"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2021
  11. "Influence of roll speed difference on microstructure, texture and mechanical properties of 7075 aluminum plates produced via combined continuous casting and rolling process"
    Faramarz Fereshteh-Saniee, محمدمهدی امیری
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021
  12. "An investigation on the effects of the process parameters of hydro-mechanical deep drawing on manufacturing high-quality bimetallic spherical-conical cups"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020
  13. "Development of new fiber textures for enhancing mechanical properties of 2024 Al alloy using elevated-temperature constrained groove pressing"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی, Ali Sonboli
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020
  14. "An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties, anisotropy and texture of 2024 Al sheets"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی, Ali Sonboli
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020
  15. "An Experimental Investigation on the Effect of Cooling Rate During Combined Continuous Casting and Rolling Process on Mechanical Properties of 7075 Aluminum Alloy"
    Faramarz Fereshteh-Saniee, محمدمهدی امیری
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020
  16. "Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی
    Journal of Computational Applied Mechanics, 2019
  17. "An Inclusive Experimental Investigation on Influences of Different Process Parameters in Warm Incremental Forming of AZ31 Magnesium Sheets"
    Faramarz Fereshteh-Saniee, حسین خزاعلی
    Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 2019
  18. "Process Parameter Enhancement for Incremental Forming of Titanium Ti–6Al–4V Truncated Cone with Varying Wall Angle at Elevated Temperatures"
    Faramarz Fereshteh-Saniee, حسین خزاعلی
    International Journal of Precision Engineering and Manufacturing, 2019
  19. "Influence of Combined Severe Plastic Deformation and Sheet Extrusion Process on the Superplastic Formability of AA 5083 Aluminum Alloy Assessed by Free Bulge Test"
    Faramarz Fereshteh-Saniee, نعیمه فخار, Reza Mahmudi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019
  20. "An Investigation on the Effects of Optimum Forming Parameters in Hydro-mechanical Deep Drawing Process Using the Genetic Algorithm"
    Faramarz Fereshteh-Saniee, سعید یعقوبی
    Journal of Computational Applied Mechanics, 2018
  21. "Shear behavior of AZ80 Mg alloy using experimental, theoretical and numerical techniques"
    Faramarz Fereshteh-Saniee, A. Banafshi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018
  22. "Application of the Taguchi method for efficient studying of elevated-temperature incremental forming of a titanium alloy"
    Faramarz Fereshteh-Saniee, حسین خزاعلی
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
  23. "A new experimental-numerical approach for studying the effects of gas pressure profile on superplastic forming characteristics of Al-Mg5.6 alloy"
    Faramarz Fereshteh-Saniee, نعیمه فخار, M. asgari, Reza Mahmudi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017
  24. "Production of AZ80/Al composite rods employing non-equal channel lateral extrusion"
    Faramarz Fereshteh-Saniee, M. asgari
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016
  25. "Superior ductility and strength enhancement of ZK60 magnesium sheets processed by a combination of repeated upsetting and forward extrusion"
    Faramarz Fereshteh-Saniee, فهیمه کرمی, نعیمه فخار, Reza Mahmudi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016
  26. "Non-equal channel angular pressing (NECAP) of AZ80 Magnesium alloy: Effects of process parameters on strain homogeneity, grain refinement and mechanical properties"
    Faramarz Fereshteh-Saniee, M. asgari, M. Barati, S.M. Pezeshki
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016
  27. "Specialized mechanical properties of pure aluminum by using non-equal channel angular pressing for developing its electrical applications"
    Faramarz Fereshteh-Saniee, نعیمه فخار, M. asgari
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2016
  28. "Optimized tool design for expansion equal channel angular extrusion (Exp-ECAE) process using FE-based neural network and genetic algorithm"
    Faramarz Fereshteh-Saniee, سعید سپاهی بروجنی, A. Sepahi-Boroujeni
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016
  29. "A comprehensive experimental investigation on the influences of the process variables on warm incremental forming of Ti-6Al-4V titanium alloy using a simple technique"
    Faramarz Fereshteh-Saniee, حسین خزاعلی
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016
  30. "Significant improvements in mechanical properties of AA5083 aluminum alloy using dual equal channel lateral extrusion"
    Faramarz Fereshteh-Saniee, نعیمه فخار, Reza Mahmudi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016
  31. "Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting method"
    Faramarz Fereshteh-Saniee, H.R. abedi, Afshin Matin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015
  32. "High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures"
    Faramarz Fereshteh-Saniee, نعیمه فخار, Reza Mahmudi
    Materials and Design, 2015
  33. "The influences oftheexpansionequalchannelangularextrusion operationonthestrengthandductilityofAZ80magnesiumalloy"
    Faramarz Fereshteh-Saniee, سعید سپاهی بروجنی
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015
  34. "Expansion equal channel angular extrusion, as a novel severe plastic deformation technique"
    Faramarz Fereshteh-Saniee, سعید سپاهی بروجنی
    JOURNAL OF MATERIALS SCIENCE, 2015
  35. "An Experimental Investigation on the Strain Rate Sensitivity of a Severely Deformed Aluminum Alloy"
    Faramarz Fereshteh-Saniee, Gholam Hossein Majzoobi, سعید سپاهی بروجنی, Saeed lahmi
    EXPERIMENTAL MECHANICS, 2015
  36. "Mechanical properties improvement of cast AZ80Mg alloy/nano-particles composite via thermomechanical processing"
    Faramarz Fereshteh-Saniee, H. Khoshzaban Khosroshahi, H.R. abedi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014
  37. "Effects of die geometry on non-equal channel lateral extrusion )NECLE) of AZ80 magnesium alloy"
    Faramarz Fereshteh-Saniee, M. asgari, M. Barati, S.M. Pezeshki
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014
  38. "مطالعات ریزساختاری و خواص مکانیکی فرآیند هیدروفرمینگ ورق های آلیاژی منیزیم AZ31B و آلومینیم AA2024 در دماهای بالا"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی, سعید یعقوبی
    مهندسي ساخت و توليد, 2021
  39. "بررسی تأثیرات متغیّرهای فرایند در شکل دهی تدریجی گرم تیتانیمTi-6Al-4V"
    Faramarz Fereshteh-Saniee, حسین خزاعلی
    مهندسي مكانيك دانشگاه تبريز, 2018

Conference Paper

  1. "تأثیر فرآیند اکستروژن مستقیم بر خواص مکانیکی دو آلیاژ زیستتخریبپذیر منیزیمی نوع ZK"
    Faramarz Fereshteh-Saniee, رحمان مقصودی
    ICME2023, 2023
  2. "مطالعۀ تجربی تأثیرات فرآیند اکستروژن جانبی در کانالهای نامساوی و نانو ذرات 3O2Al بر میزان سختی و اندازه دانه آلیاژ منیزیم AZ80"
    Faramarz Fereshteh-Saniee, رضا قاسمی
    ICME2023, 2023
  3. "Impacts of elevated-temperature constrained groove pressing on the mechanical properties and microstructure of light-weight alloy sheets"
    Faramarz Fereshteh-Saniee, صادق قربانحسینی
    ICME2019, 2019