پروفایل استاد - دانشگاه بوعلی سینا همدان
استاد
تاریخ بهروزرسانی: 1403/08/10
فرامرز فرشته صنیعی
مهندسی / مهندسی مکانیک
مقالات علمی چاپ شده در مجلات
-
"Inclusive anisotropy and texture analyses ofAZ91 Mg sheets subjected to various passesof elevated-temperature constrainedgroove pressing"
Faramarz Fereshteh-Saniee, صادق قربانحسيني, Ali Sonboli
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. , 2023 -
"Superior combined strength and elongation by conducting elevatedtemperature constrained groove pressing on Al–Mg–Mn sheets"
علي احمدي جبلي, Faramarz Fereshteh-Saniee
MATERIALS CHEMISTRY AND PHYSICS, Vol. , 2023 -
"Textural and microstructural analyses and rankingof the process parameters in hydro-mechanicaldeep drawing of AZ31B magnesium sheets"
Faramarz Fereshteh-Saniee, سعيد يعقوبي
Journal of Materials Research and Technology-JMR&T, Vol. , pp.9261-9272, 2023 -
"Microstructure and hot shear deformation behavior of a fine-grained AA5083 aluminum alloy"
نعيمه فخار, احسان خادمي, Mahdi Sabbaghian, ّamir momeni, Faramarz Fereshteh-Saniee, Abel Szabo, Peter Nagy, Jeno Gobicza
MATERIALS CHEMISTRY AND PHYSICS, Vol. , 2023 -
"Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets UsingCRITIC, MEREC and TOPSIS Techniques"
سعيد يعقوبي, مسعود صفري, Faramarz Fereshteh-Saniee
Iranian Journal of Materials Forming, Vol. , pp.13-25, 2023 -
"EFFECTS OF PROCESS VARIABLES ON THE UNIFORMITY OF AL-ST AND AL-MG LAMINATED COMPOSITE CUPS PRODUCED BY HYDRO-MECHANICAL DEEP DRAWING OPERATION"
سعيد يعقوبي, Faramarz Fereshteh-Saniee
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. , pp.424-434, 2023 -
"EFFECTS OF MOLD ROTATION SPEED AND CAST THICKNESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ80 PREPARED BY CENTRIFUGAL CASTING"
مهدي عربي نور, Faramarz Fereshteh-Saniee
International Journal of Metalcasting, Vol. , pp.894-908, 2022 -
"A comprehensive comparison between the effect of elevated temperature constrained groove pressing on the microstructural evolutions, crystallographic texture, and mechanical properties of Al 2024 and Mg AZ91D alloys"
Faramarz Fereshteh-Saniee, صادق قربانحسيني, سعيد يعقوبي
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. , pp.463-472, 2022 -
"A comprehensive study on soundness, microstructure, and uniformity of 2024 aluminum cups hydro‑mechanically drawn at elevated temperatures"
سعيد يعقوبي, Faramarz Fereshteh-Saniee
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , pp.7905-7917, 2022 -
"Optimization of the geometrical parameters for elevated temperature hydro-mechanical deep drawing process of 2024 aluminum alloy"
سعيد يعقوبي, Faramarz Fereshteh-Saniee
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. , pp.151-161, 2021 -
"Influence of roll speed difference on microstructure, texture and mechanical properties of 7075 aluminum plates produced via combined continuous casting and rolling process"
محمدمهدي اميري, Faramarz Fereshteh-Saniee
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , pp.901-912, 2021 -
"An investigation on the effects of the process parameters of hydro-mechanical deep drawing on manufacturing high-quality bimetallic spherical-conical cups"
سعيد يعقوبي, Faramarz Fereshteh-Saniee
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , pp.1805-1818, 2020 -
"Development of new fiber textures for enhancing mechanical properties of 2024 Al alloy using elevated-temperature constrained groove pressing"
صادق قربانحسيني, Faramarz Fereshteh-Saniee, Ali Sonboli
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2020 -
"An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties, anisotropy and texture of 2024 Al sheets"
Faramarz Fereshteh-Saniee, صادق قربانحسيني, Ali Sonboli
JOURNAL OF ALLOYS AND COMPOUNDS, Vol. , 2020 -
"An Experimental Investigation on the Effect of Cooling Rate During Combined Continuous Casting and Rolling Process on Mechanical Properties of 7075 Aluminum Alloy"
Faramarz Fereshteh-Saniee, محمدمهدي اميري
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. , pp.441-448, 2020 -
"Influence of Combined Severe Plastic Deformationand Sheet Extrusion Process on the SuperplasticFormability of AA 5083 Aluminum Alloy Assessed by FreeBulge Test"
Faramarz Fereshteh-Saniee, نعيمه فخار, Reza Mahmudi
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. , 2019 -
"Multi-objective optimization of geometrical parameters forconstrained groove pressing of aluminium sheet using a neuralnetwork and the genetic algorithm"
صادق قربانحسيني, Faramarz Fereshteh-Saniee
Journal of Computational Applied Mechanics, Vol. , pp.275-281, 2019 -
"An Inclusive Experimental Investigation on Influences of Different Process Parameters in Warm Incremental Forming of AZ31 Magnesium Sheets"
حسين خزاعلي, Faramarz Fereshteh-Saniee
Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. , pp.347-358, 2019 -
"Process Parameter Enhancement for Incremental Forming of TitaniumTi–6Al–4V Truncated Cone with Varying Wall Angle at ElevatedTemperatures"
حسين خزاعلي, Faramarz Fereshteh-Saniee
International Journal of Precision Engineering and Manufacturing, Vol. , 2019 -
"An Investigation on the Effects of Optimum Forming Parameters in Hydro-mechanical Deep Drawing Process Using the Genetic Algorithm"
Faramarz Fereshteh-Saniee, سعيد يعقوبي
Journal of Computational Applied Mechanics, Vol. , pp.54-62, 2018 -
"Shear behavior of AZ80 Mg alloy usingexperimental, theoretical and numerical techniques"
Faramarz Fereshteh-Saniee, A. Banafshi
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2018 -
"Application of the Taguchi method for efficient studyingof elevated-temperature incremental forming of a titanium alloy"
Faramarz Fereshteh-Saniee, حسين خزاعلي
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. , pp.43-52, 2018 -
"A new experimental-numerical approach for studying the effects of gas pressure profile on superplastic forming characteristics of Al-Mg5.6 alloy"
نعيمه فخار, M. asgari, Reza Mahmudi, Faramarz Fereshteh-Saniee
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2017 -
"Significant improvements in mechanical properties ofAA5083 aluminum alloy using dual equal channel lateral extrusion"
نعيمه فخار, Faramarz Fereshteh-Saniee, Reza Mahmudi
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2016 -
"Superior ductility and strength enhancement of ZK60 magnesiumsheets processed by a combination of repeated upsetting and forwardextrusion"
Faramarz Fereshteh-Saniee, نعيمه فخار, فهيمه كرمي, Reza Mahmudi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2016 -
"Specialized mechanical properties of pure aluminum by usingnon-equal channel angular pressing for developing its electricalapplications"
M. asgari, Faramarz Fereshteh-Saniee, نعيمه فخار
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. , pp.779-790, 2016 -
"Non-equal channel angular pressing (NECAP) of AZ80 Magnesium alloy:Effects of process parameters on strain homogeneity, grain refinement andmechanical properties"
M. asgari, Faramarz Fereshteh-Saniee, S.M. Pezeshki, M. Barati
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2016 -
"Production of AZ80/Al composite rodsemploying non-equal channel lateral extrusion"
M. asgari, Faramarz Fereshteh-Saniee
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2016 -
"A comprehensive experimental investigation on the influencesof the process variables on warm incremental formingof Ti-6Al-4V titanium alloy using a simple technique"
حسين خزاعلي, Faramarz Fereshteh-Saniee
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2016 -
"Optimized tool design for expansion equal channel angularextrusion (Exp-ECAE) process using FE-based neural networkand genetic algorithm"
Faramarz Fereshteh-Saniee, سعيد سپاهي بروجني, A. Sepahi-Boroujeni
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2016 -
"High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures"
نعيمه فخار, Faramarz Fereshteh-Saniee, Reza Mahmudi
Materials and Design, Vol. , 2015 -
"An Experimental Investigation on the Strain Rate Sensitivityof a Severely Deformed Aluminum Alloy"
Faramarz Fereshteh-Saniee, سعيد سپاهي بروجني, Saeed lahmi, Gholam Hossein Majzoobi
EXPERIMENTAL MECHANICS, Vol. , 2015 -
"Expansion equal channel angular extrusion, as a novel severeplastic deformation technique"
سعيد سپاهي بروجني, Faramarz Fereshteh-Saniee
JOURNAL OF MATERIALS SCIENCE, Vol. , 2015 -
"The influences oftheexpansionequalchannelangularextrusionoperationonthestrengthandductilityofAZ80magnesiumalloy"
سعيد سپاهي بروجني, Faramarz Fereshteh-Saniee
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2015 -
"Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting method"
Afshin Matin, Faramarz Fereshteh-Saniee, H.R. abedi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , pp.81-88, 2015 -
"Effects of die geometry on non-equal channel lateral extrusion )NECLE) ofAZ80 magnesium alloy"
Faramarz Fereshteh-Saniee, M. asgari, M. Barati, S.M. Pezeshki
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , pp.3274-3284, 2014 -
"Mechanical properties improvement of cast AZ80Mg alloy/nano-particles composite via thermomechanical processing"
H. Khoshzaban Khosroshahi, Faramarz Fereshteh-Saniee, H.R. abedi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , pp.284-290, 2014 -
"مطالعات ریزساختاری و خواص مکانیکی فرآیند هیدروفرمینگ ورق های آلیاژی منیزیم AZ31B و آلومینیم AA2024 در دماهای بالا"
فرامرز فرشته صنیعی، سعید یعقوبی، صادق قربانحسینی
مهندسی ساخت و تولید، نسخه ، صفحات:39-48، 1400 -
"بررسی تاثیرات متغیّرهای فرایند در شکل دهی تدریجی گرم تیتانیمTi-6Al-4V"
فرامرز فرشته صنیعی، حسین خزاعلی
مهندسی مکانیک دانشگاه تبریز، نسخه ، صفحات:77-86، 1397
مقالات علمی ارائه شده در همایشها
-
"Impacts of elevated-temperature constrained groove pressing on the mechanical properties and microstructure of light-weight alloy sheets"
Faramarz Fereshteh-Saniee, صادق قربانحسيني
ICME2019, 2019 -
"مطالعۀ تجربی تاثیرات فرآیند اکستروژن جانبی در کانالهای نامساوی و نانو ذرات 3O2Al بر میزانسختی و اندازه دانه آلیاژ منیزیم AZ80"
رضا قاسمی، فرامرز فرشته صنیعی
نوزدهمین همایش ملی و هشتمین همایش بین المللی ساخت و تولید، 1401 -
"تاثیر فرآیند اکستروژن مستقیم بر خواص مکانیکی دو آلیاژ زیستتخریبپذیر منیزیمی نوع ZK"
رحمان مقصودی، فرامرز فرشته صنیعی
نوزدهمین همایش ملی و هشتمین همایش بین المللی ساخت و تولید، 1401