menu
Rahman Seifi

Professor

Update: 2024-05-16

Rahman Seifi

Faculty of Engineering / Department of Mechanical Engineering

Journal Papers

  1. "An approach to predicting corrosion fatigue for marine applications"
    آوا خواجه ئيان, Amir Hossein Mahmoudi, Rahman Seifi
    INTERNATIONAL JOURNAL OF FATIGUE, Vol. , 2023
  2. "Study of stress intensity factors in sliding and tearingmodes for subsurface elliptical cracks in rolling trainwheels"
    Rahman Seifi, mohammad asadi-dalir
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. , pp.2568-2584, 2023
  3. "Determination of dynamic deformation behavior of Golden Delicious appleusing finite element method and its validation by scanningelectron microscopy"
    ابراهيم چاوشي, Ebrahim Ahmadi, Ali Alavi Nia, Rahman Seifi
    SCIENTIA HORTICULTURAE, Vol. , pp.1-9, 2022
  4. "An investigation on the crack growth in aluminum alloy 7075-T6 under cyclic mechanical and thermal loads"
    عرفان كاكاوند, Rahman Seifi, مصطفي ابوالفتحي
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. , pp.1-10, 2022
  5. "Investigating the Microstructure, Hardness and Tensile Behavior of Magnesium AZ80 Alloy and AZ80/SiC Nanocomposite Manufactured Through Dual Equal Channel Lateral Extrusion (DECLE)"
    Mohammad Amin Salavati, A. Imam, Rahman Seifi, F. Akbaripanah
    METALS AND MATERIALS INTERNATIONAL, Vol. , pp.3538-3549, 2021
  6. "Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance"
    Rahman Seifi, محمدرضا محمدي
    Journal of Stress Analysis, Vol. , pp.11-20, 2021
  7. "Fatigue crack growth determination based on cyclic plastic zone and cyclic J‐integral in kinematic–isotropic hardening materials with considering Chaboche model"
    Rahman Seifi, رضا حسيني
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. , pp.2668-2682, 2020
  8. "Fatigue life estimation of the overloaded notched components"
    محمدرضا محمدي اغميوني, Rahman Seifi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. , 2020
  9. "Analysis of free vibration of an isotropic plate with surface or internal long crack using generalized differential quadrature method"
    Rahman Seifi, ميلاد رنجبران
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. , pp.42-52, 2020
  10. "Buckling analysis of cracked laminated plates by domain decomposition method"
    Rahman Seifi, ميلاد رنجبران
    Ships and Offshore Structures, Vol. , pp.331-339, 2019
  11. "Customized weight function for cracks initiated from semi-circular notches"
    محمدرضا محمدي اغميوني, Rahman Seifi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. , pp.1-7, 2019
  12. "Mixed‑mode fracture toughness versus thickness and yield strengthin aluminum alloys"
    مصطفي بحري, Rahman Seifi
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. , pp.1-10, 2019
  13. "Study of hardening and cyclic plastic behaviour around thecrack tip of C(T) specimen made by as‐received andannealed copper"
    Rahman Seifi, رضا حسيني
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. , pp.19-30, 2019
  14. "Total fatigue lives, crack growth paths and cycles in cold expanded adjacentholes"
    Rahman Seifi
    INTERNATIONAL JOURNAL OF FATIGUE, Vol. , pp.69-77, 2018
  15. "Maximizing working pressure of autofrettaged three layercompound cylinders with considering Bauschinger effectand reverse yielding"
    Rahman Seifi
    MECCANICA, Vol. , pp.2845-2501, 2018
  16. "Effects of crack orientation on the fatigue crack growth rate and fracturetoughness of AA6063 alloy deformed by ECAP"
    محمدعلي كاظمي, Rahman Seifi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , pp.71-79, 2018
  17. "Enhancement anaerobic digestion and methane production from kitchen waste by thermal and thermo-chemical pretreatments in batch leach bed reactor with down flow"
    سيدعباس رادمرد, Hossein Hajy Agha Alizade, Rahman Seifi
    Research in Agricultural Engineering, Vol. , pp.128-135, 2018
  18. "An investigation on the effects of equal channel angular pressing on the mixed‐mode fracture toughness and mechanical properties of 6063 aluminium alloy"
    Rahman Seifi, محمدعلي كاظمي
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. , pp.1758-1770, 2018
  19. "A generalized weight function for cracks emanated from sharp and blunt V-notches"
    محمدرضا محمدي اغميوني, Rahman Seifi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. , pp.131-139, 2018
  20. "Effects of Tensile Overload on Crack Initiation Life and FatigueCrack Growth in Notched Specimens"
    Rahman Seifi, محمدرضا محمدي اغميوني
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. , pp.2339-2348, 2018
  21. "Experimental study of fatigue crack growth in raw and annealed pure copperwith considering cyclic plastic effects"
    Rahman Seifi, رضا حسيني
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. , pp.1-9, 2018
  22. "Effects of Contact Surface Roughness of Interference Shaft/BushJoints on its Characteristics"
    Rahman Seifi, كاوه عباسي, Masood Asayesh
    Iranian Journal of Science & Technology- Transaction of Mechanical Engineering علوم و تكنولوژي - مهندسي مكانيك - دانشگاه شيراز, Vol. , pp.1-14, 2017
  23. "Axial buckling of perforated plates reinforced withstrips and middle tubes"
    Rahman Seifi, صابر چهاردولي, علي اخوان عطار
    MECHANICS RESEARCH COMMUNICATIONS, Vol. , pp.21-32, 2017
  24. "Influence of Hardening on the Cyclic Plastic Zone AroundCrack Tip in Pure Copper CT Specimens"
    Rahman Seifi, رضا حسيني
    Journal of Stress Analysis, Vol. , pp.43-53, 2017
  25. "Effects of internal pressure on bending buckling of imperfectfunctionally graded thin cylinders"
    Rahman Seifi, Moslem Avatefi
    COMPOSITE STRUCTURES, Vol. , pp.12-24, 2016
  26. "Evaluation of the anaerobic digestion of kitchen waste by thermalpretreatment in a batch leach bed reactor with down flow and the kinetics ofmethane yields"
    Hossein Hajy Agha Alizade, سيدعباس رادمرد, Rahman Seifi
    Biofuels-UK, Vol. , 2016
  27. "Stress intensity factors for internal surface cracks in autofrettagedfunctionally graded thick cylinders using weight function method"
    Rahman Seifi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. , pp.113-123, 2015
  28. "Friction coefficient estimation in shaft/bush interference usingfinite element model updating"
    Rahman Seifi, كاوه عباسي
    ENGINEERING FAILURE ANALYSIS, Vol. , pp.310-322, 2015
  29. "Buckling of cracked cylindrical panels under axially compressive andtensile loads"
    Rahman Seifi, Hamed Saeidi, Mohammad Farrokhi
    THIN-WALLED STRUCTURES, Vol. , pp.457-465, 2015
  30. "EXACT AND APPROXIMATE SOLUTIONS OFTHERMOELASTIC STRESSES IN FUNCTIONALLY GRADEDCYLINDERS"
    Rahman Seifi
    JOURNAL OF THERMAL STRESSES, Vol. , 2015
  31. "Study on life and path of fatigue cracks in multiple site damage plates"
    Rahman Seifi, Oshin Ghadimian, Milad Ranjbaran
    INTERNATIONAL JOURNAL OF FATIGUE, Vol. , pp.449-458, 2015
  32. "Experimental and numerical study of residual stressescaused by cold expansion of adjacent holes"
    Rahman Seifi, Mohammad Hassan Zolfaghari, Ali Shirazi
    MECCANICA, Vol. , 2014
  33. "Direct method for deriving equilibrium equations in solid continuous systems"
    Rahman Seifi, mohammad asadi-dalir
    Engineering Solid Mechanics, Vol. , pp.321-330, 2014
  34. "بررسي فشار تركيدگي استوانه دولايه ي متداخل اتوفرتاژ شده با وجود ترك در سطح داخلي، بر اساس انتگرال J"
    Rahman Seifi, محمدسجاد خداياري
    مهندسی مکانیک مدرس, Vol. , pp.223-234, 2023
  35. "شبيهسازي المان محدود صدمات ديناميكي سيب بر اساس دادههايآزمون ضربه پاندول و اعتبارسنجي آن با ميكروسكوپ الكتروني روبشي"
    ابراهيم چاوشي, Ebrahim Ahmadi, Ali Alavi Nia, Rahman Seifi
    مهندسی بیوسیستم ایران, Vol. , pp.249-267, 2022
  36. "كمانش ورقهاي مستطيلي با ضخامت متغير"
    H. Seifi, Rahman Seifi, Mahdi Kazemi
    مهندسي مكانيك دانشگاه تبريز, Vol. , pp.615-619, 2021
  37. "بررسي عددي و تجربي اثر عيوب هندسه در سطح تماس اتصالات تداخلي بر استحكام اتصال"
    Rahman Seifi, كاوه عباسي
    مهندسي مكانيك دانشگاه تبريز, Vol. , pp.215-224, 2018
  38. "ﺗﺎﺛﯿﺮ آﻣﺎده ﺳﺎزي ﮔﺮﻣﺎﯾﯽ و ﺗﺮﻣﻮﺷﯿﻤﯿﺎﯾﯽ ﭘﺴﻤﺎﻧﺪ ﻣﻮاد ﻏﺬاﯾﯽ ﺑﺮ ﻋﻤﻠﮑﺮد ﻫﻀﻢ ﺑﯽ ﻫﻮازي و ﺗﻮﻟﯿﺪ ﮔﺎز ﻣﺘﺎن در رآﮐﺘﻮر ﺑﺴﺘﺮ ﺻﺎﻓﯽ ﺑﺎ ﺟﺮﯾﺎن رو ﺑﻪ ﭘﺎﯾﯿﻦ در دﻣﺎي ﺗﺮﻣﻮﻓﯿﻠﯿﮏ"
    سيدعباس رادمرد, Hossein Hajy Agha Alizade, Rahman Seifi
    مجله سلامت و بهداشت اردبیل, Vol. , pp.7-17, 2018
  39. "اثر فرآيند پرس در كانال هاي زاويه دار مساوي(ECAP) بر پارامتر هاي شكست و خستگي آلومينيوم 6063"
    محمدعلي كاظمي, Rahman Seifi
    مهندسی مکانیک مدرس, Vol. , pp.345-353, 2018
  40. "بررسي تجربي و عددي تاثير فرايند ساچمه زني شديد بر افزايش عمر خستپي آلومينيوم A356"
    Rahman Seifi, Amir Hossein Mahmoudi, مجيد نيكنام, Gholamhossein Farrahi, علي قاسمي
    مهندسی مکانیک شریف, Vol. , pp.133-140, 2017
  41. "بررسي رشد ترك خستگي ناشي از خمش در استوانه‏ هاي اتوفرتاژ شده با ترك خارجي"
    Rahman Seifi, Hossein Hakimi
    مهندسی مکانیک مدرس, Vol. , pp.35-44, 2017
  42. "بررسي توليد متان از پسماند مواد غذايي با استفاده از تابشمايكروويو : تاثير توان و زمان تابش و ارائه سينيتك فرآيند"
    Hossein Hajy Agha Alizade, Rahman Seifi, سيدعباس رادمرد
    Journal of Mazandaran University of Medical Sciences, Vol. , pp.170-180, 2016
  43. "بازيابي سطوح تخريبي اتصال تداخلي شفت و ياتاقان با استفاده از آبكاري كروم سخت"
    Rahman Seifi, كاوه عباسي
    مهندسی مکانیک مدرس, Vol. , pp.57-64, 2016
  44. "كمانش پانلهاي تركدار تحت بار محوري فشاري و كششي"
    Rahman Seifi, Mohammad Farrokhi
    روش های عددی در مهندسی (استقلال), Vol. , pp.155-164, 2015
  45. "بررسي تاثير فرآيند اتوفرتاژ در استوانه با مواد مدرج تابعي روي پارامترهاي ترك سطحي خارجي..."
    Rahman Seifi, Ali Reza Dejam
    مهندسی مکانیک مدرس, Vol. , pp.255-264, 2015
  46. "بررسي اثرسخت شوندگي سينماتيكي در اتوفرتاژ استوانه هاي جدار ضخيم"
    Rahman Seifi, Gholam Hossein Majzoobi, Hafiz allah Bani Asad
    مهندسی مکانیک شریف, Vol. , pp.75-81, 2014
  47. "بررسي تجربي و عددي چين خوردگي فلنجي ورق ها در كشش عميق دوفلزي"
    Rahman Seifi, Zahra Abbasi
    علوم کاربردی و محاسباتی در مکانیک, Vol. , pp.65-82, 2014

Conference Papers

  1. "Influence of Speed Print and Raster Angle on the Mechanical Properties of ABS Polymer Parts Produced by Fused Deposition Modelling"
    Rahman Seifi, Sabereh Bazraee, Saeed Bazraee
    15th International Seminar on Polymer Science and Technology, 2022
  2. "استخراج تابع توزيع تنش در اطراف شيارهاي لبه اي بيضي شكلبا روش تحليلي"
    محمدرضا محمدي اغميوني, Rahman Seifi
    ISME, 2019
  3. "ارايه روشي خلاقانه براي محاسبه ضريب شدت تنش ناچهاي V شكل با سوراخ انتهايي"
    محمدرضا محمدي اغميوني, Rahman Seifi
    ISME, 2019
  4. "ارائه رابطه جديد براي محاسبه ناحيه تحت تاثير گراديانهايتنش فاقهاي نيمدايرهاي"
    محمدرضا محمدي اغميوني, Rahman Seifi
    ISME, 2019
  5. "مدلسازي اجزا محدود اتصالات تداخلي قطعات همراه با عيوب فرم سطحي"
    Foad Faraji, Rahman Seifi, كاوه عباسي
    Modern achievements on aerospace and related sciences, 2015
  6. "بررسي تاثير خزش در آزاد سازي تنش پسماند جوشكاري"
    Rahman Seifi, Mahsa Baghaei-far
    -, 2015
  7. "بررسي اصطكاك و چسبندگي بر عمق شروع تسليم در تماس سطوح كروي"
    Rahman Seifi, Navid Fallahi-nia
    -, 2015
  8. "بررسي ناپايداري استوانه هاي جدارنازك بلند تحت بار خمشي"
    Ehsan Daneshkhah, Hossein Hakimi, Rahman Seifi
    -, 2015