ميثم نوري

Journal Papers

1. "Enhancing Mechanical and Tribological Performance of CrN/CrTiSiN Coating through Annealing Treatment"
   محمدعلي سهرابي زاده, Hassan Elmkhah, Naiming Lin, Meisam Nouri
   International Journal of Refractory Metals & Hard Materials, Vol. , 2024
2. "Atomic Radius Mismatch: A Key Parameter for Design and Synthesis of High-Entropy PVD Coatings – Review"
   Erfan Lotfi-Khojasteh, Hassan Elmkhah, Meisam Nouri, Paul Heinz Mayrhofer
   ADVANCED ENGINEERING MATERIALS, Vol. , 2024
3. "Role of TiO2 Nanoparticles in Wet Friction and Wear Propertiesof PEO Coatings Developed on Pure Titanium"
   مريم مولايي, Arash Fattah-alhosseini, Meisam Nouri, Mosab Kaseem
   Metals, Vol. , 2023
4. "Assessing the wear properties of plasma electrolytic oxidation TiO2 coatingsincorporated ZrO2 nanoparticles on Cp-Ti in simulated body fluid"
   مريم مولايي, Arash Fattah-alhosseini, Meisam Nouri, Mosab Kaseem
   Applied Surface Science Advances, Vol. , 2023
5. "The post-annealing effect on tribological and corrosionbehaviors of CrN/AlCrN multilayered coating applied byCAE-PVD"
   Erfan Lotfi-Khojasteh, Hassan Elmkhah, Meisam Nouri, Omid Imantalab, Arash Fattah-alhosseini
   International Journal of Applied Ceramic Technology, Vol. , pp.2874-2887, 2023
6. "The Impact of Mechanical Post-Treatment on the Tribological and Corrosion Behavior of CrN/CrAlN Coatings Applied Using the CAE-PVD Technique"
   اميرحسين قرباني, Hassan Elmkhah, Omid Imantalab, Mostafa Meghdari, Meisam Nouri, Arash Fattah-alhosseini
   Applied Surface Science Advances, Vol. , 2023
7. "Corrosion and Bioactivity Properties of Calcium-Phosphate PEO Coating onAZ31 Mg Alloy Reinforced by Forsterite (Mg2SiO4) Nanoparticles"
   اميرحسين كاظمي, Arash Fattah-alhosseini, مريم مولايي, Meisam Nouri
   Iranian Journal of Materials Science and Engineering, Vol. , pp.1-16, 2022
8. "Incorporating TiO2 nanoparticles to enhance corrosion resistance,cytocompatibility, and antibacterial properties of PEO ceramic coatingson titanium"
   مريم مولايي, Arash Fattah-alhosseini, Meisam Nouri, Pezhman Mahmoodi, Alireza Nourian
   CERAMICS INTERNATIONAL, Vol. , 2022
9. "A review of effective strides in amelioration of the biocompatibility ofPEO coatings on Mg alloys"
   Arash Fattah-alhosseini, راضيه چهارمحالي, كاظم بابايي, Meisam Nouri, Mohsen K. Keshavarz, Mosab Kaseem
   Journal of Magnesium and Alloys, Vol. , 2022
10. "The Study of the Electrochemical and Tribological Behaviors of CrN/AlCrNCoating Deposited by the Arc-PVD Technique"
    Erfan Lotfi-Khojasteh, Hassan Elmkhah, Meisam Nouri, Omid Imantalab, Arash Fattah-alhosseini
    Iranian Journal of Materials Science and Engineering, Vol. , pp.1-12, 2022
11. "Corrosion, Wear, and Antibacterial Behaviors ofHydroxyapatite/MgO Composite PEO Coatings on AZ31 MgAlloy by Incorporation of TiO2 Nanoparticles"
    حنانه مظفرنيا, Arash Fattah-alhosseini, راضيه چهارمحالي, Meisam Nouri, Mohsen K. Keshavarz, Mosab Kaseem
    Coatings, Vol. , 2022
12. "Enhancing cytocompatibility, antibacterial activity and corrosion resistanceof PEO coatings on titanium using incorporated ZrO2 nanoparticles"
    مريم مولايي, Arash Fattah-alhosseini, Meisam Nouri, Pezhman Mahmoodi, sahar hamoon navard, Alireza Nourian
    Surfaces and Interfaces, Vol. , 2022
13. "Systematic optimization of corrosion, bioactivity, and biocompatibilitybehaviors of calcium-phosphate plasma electrolytic oxidation (PEO)coatings on titanium substrates"
    مريم مولايي, Arash Fattah-alhosseini, Meisam Nouri, Alireza Nourian
    CERAMICS INTERNATIONAL, Vol. , 2022
14. "Antibacterial activity of bioceramic coatings on Mg and its alloys createdby plasma electrolytic oxidation (PEO): A review"
    Arash Fattah-alhosseini, مريم مولايي, Meisam Nouri, كاظم بابايي
    Journal of Magnesium and Alloys, Vol. , 2022
15. "Review of the role of graphene and its derivatives in enhancing the performance of plasma electrolytic oxidation coatings on titanium and its alloys"
    Arash Fattah-alhosseini, مريم مولايي, Meisam Nouri, كاظم بابايي
    Applied Surface Science Advances, Vol. , 2021
16. "The Yttrium-Incorporated Aluminizing of Mg-3%Al Alloyfor Improved Tribological and Corrosion Properties"
    Meisam Nouri, Dongyang Li
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. , pp.3218-3227, 2021
17. "Improving surface characteristics of PEO coatings of Mg and its alloys with zirconia nanoparticles: a review"
    راضيه چهارمحالي, Arash Fattah-alhosseini, Meisam Nouri, كاظم بابايي
    Applied Surface Science Advances, Vol. , 2021
18. "Improving surface features of PEO coatings on titanium and titanium alloys with zirconia particles: A review"
    مريم مولايي, Meisam Nouri, كاظم بابايي, Arash Fattah-alhosseini
    Surfaces and Interfaces, Vol. , 2021
19. "A study of the electrochemical and tribological properties of TiN/CrN nanolayer coating deposited on carburized-H13 hot-work steel by Arc-PVDtechnique"
    عرفان لطفي خجسته, Mohammad Sahebazamani, Hassan Elmkhah, Meisam Nouri, Omid Imantalab, Arash Fattah-alhosseini
    Journal of Asian Ceramic Societies, Vol. , 2021
20. "A study on comparing surface characterization and electrochemical properties of single-layer CrN coating with nanostructured multilayer ZrN/CrN coating in 3.5 wt.% NaCl solution"
    Arash Fattah-alhosseini, Hassan Elmkhah, Omid Imantalab, Meisam Nouri, پرويز محمديان صميم
    Surfaces and Interfaces, Vol. , 2020
21. "Effect of compound layer on the corrosion behavior of plasmanitrided AISI H13 tool steel"
    زهرا عندليبي فاضل, Hassan Elmkhah, Meisam Nouri, Arash Fattah-alhosseini
    Materials Research Express, Vol. , 2019
22. "Instrumented indentation study of bainite/martensite duplex microstructure"
    Meisam Nouri, Rangasayee Kannan, Yiyu Wang, Dongyang Li, Leijun Li
    Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, Vol. , pp.1-6, 2018
23. "مروري بر عملكرد تريبولوژيكي كاشتن يها و قطع ههاي فلزي مورد استفاده در بدن و را هكارهاي بهبود مقاومت به سايش آ نها با استفاده از رو شهاي پوش شدهي"
    راضيه چهارمحالي, Meisam Nouri, Arash Fattah-alhosseini
    مهندسی متالورژی, Vol. , pp.145-163, 2021

Conference Papers

1. "مطالعه سايش دما بالا پوشش آنتروپي بالاي TiAlCrSiZr)N) اعمال شده به روش Arc-PVD بر زيرلايه فولاد زنگ نزن 304"
   Erfan Lotfi-Khojasteh, Hassan Elmkhah, Meisam Nouri, عليرضا ملكي
   12th International Conference on Materials & Metallurgical Engineering (iMat2022), 2023
2. "مقايسه رفتار خوردگي پوشش هاي چندلايه نانوساختار TiN/CrN و CrN/TiN با زبري سطح متفاوت"
   زهرا افشار, Meisam Nouri, Hassan Elmkhah, Arash Fattah-alhosseini
   12th International Conference on Materials & Metallurgical Engineering (iMat2022), 2023
3. "مطالعه و ارزيابي رفتار سايشي پوشش هاي CrN، CrTiN، CrTiSiN اعمال شده به روش تبخير قوس كاتدي"
   Nafiseh Freshteh-Saniee, Hassan Elmkhah, Meisam Nouri
   23 th National conference on surface engineering, 2023
4. "مقايسه رفتار خوردگي پوشش هاي آنتروپي بالاي فلزي شيشه اي و چندلايه نيتريدي بر پايه AlCrSiTiZr رسوب نشاني شده با روش CAE-PVD"
   Erfan Lotfi-Khojasteh, Hassan Elmkhah, Meisam Nouri, Masoud Atapour
   23 th National conference on surface engineering, 2023
5. "مقايسه رفتار فرسايشي پوشش هاي چندلايه نانوساختار CrN/TiN و TiN/CrN اعمال شده به روش CAE-PVD"
   زهرا افشار, Meisam Nouri, Hassan Elmkhah
   23 th National conference on surface engineering, 2023
6. "بررسي مقايسه اي اثر الكتروليت اصلاح شده و شدت جريان افزاينده بر فرآيند آندايز سخت آلومينيوم 6T-6061"
   Seyyed Soroush Asgharian, Seyyed Reza Khadem, Meisam Nouri, Hassan Elmkhah
   23 th National conference on surface engineering, 2023
7. "ارزيابي رفتار سايشي پوشش هاي CrTiSiN توسط عمليات پسا تاب كاري اعمال شده به روش نهشت فيزيكي بخار با تبخير قوس كاتدي"
   محمدعلي سهرابي زاده, Hassan Elmkhah, Meisam Nouri
   23 th National conference on surface engineering, 2023
8. "تأثير تركيب شيميايي و زبري سطح پوشش بر رفتار سايشي پوشش هاي چندلايه نانوساختار TiN/CrN"
   زهرا افشار, Meisam Nouri, Hassan Elmkhah
   11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
9. "بررسي مقاومت به فرسايش پوششهاي CrN، CrTiN و CrTiSiN"
   Nafiseh Freshteh-Saniee, Hassan Elmkhah, Meisam Nouri
   11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
10. "بررسي تجربه هاي جهاني در بازيافت لامپ هاي فرسوده و سوخته"
    Haniyeh Bayat, Haniyeh Mirzaei, Meisam Nouri
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
11. "مدل پيش بيني اصطكاك آلياژهاي پايه منيزيم با استفاده از الگوريتمهاي يادگيري ماشين"
    نگار باقريه, Meisam Nouri, Moslem Noori
    11th International Conference on Materials & Metallurgical Engineering (iMat2022), 2022
12. "بررسي شركت هاي فعال در حوزه بازيافت پسماندهاي الكتريكي و الكترونيكي در كشورهاي مختلف"
    Meisam Nouri, Mohammad Sadegh Karimi, سامان خادم جعفري, سوگند حاجوي
    The 11th National Conference on Environment, Energy and Sustainable Natural Resources, 2022
13. "بررسي رفتار تريبولوژيكي پوشش نانولايه CrN/AlCrN لايه نشاني شده با روش Arc-PVD براي كاربرد در قالب هاي دايكاست"
    Hassan Elmkhah, Meisam Nouri, Erfan Lotfi-Khojasteh, Mohammad Reza Jafari, Mohammad Sahebazamani, Ehsan Farahani
    21th National surface engineering conference, 2021
14. "بررسي پيشرفت روند فناوري نانو در مهندسي سطح و آبكاري بر اساس تحليل پتنتهاي جهاني"
    Hassan Elmkhah, Hosein Salehi vaziri, Meisam Nouri
    11th, 2010